• CEM wins contract to secure Changsha Huanghua International Airport, China
  Located inside the Duque de Caxias Palace, the Military Command of the East is one of the seven Military Commands of Brazilian Army and responsible for securing the states of Rio de Janeiro, Minas Gerais and Espírito Santo.

• ony and milestone collaborates to enhance reliability of surveillance technologies with edge recording solution
  Sony Electronics Asia Pacific in collaboration with Milestone Systems has developed an edge recording solution designed to enhance reliability and performance of its CCTV surveillance technologies.

• Infinite creative possibilities brought to life with  Sony’s new XDCAM EX™ camcorder
  The expanding family of Sony’s award-winning XDCAM EX™ series of products now includes the PMW-320 shoulder-mount camcorder that delivers new levels of creativity and convenience for solid-state digital production. Equipped with 3 cutting edge ½-inch Exmor™ full HD 1920x1080 CMOS imagers, the PMW-320 delivers superb picture performance with full HD picture resolution.

• Sure Safety : Rapid Trolley
  Saviour Rapid Trolley mounted breathing system is designed for extended use for long duration breathing in hazardous atmosphere. A unique breathing system for 3 hours of breathing, which can be extended to unlimited duration because of its unique change over system. Supplying air to single or multiple workers with compressed air.idealy used in chemical / gaseous and chemical leakages.

• “Saviour” chlorine leakage control kit-100 KG /900 KG
  The device is made of strong IS 226 steel material in one piece design attached with side mounted anti-friction device and clamps. It has a control sliding hood and key arrangement to control any of the two valves. A Butyl Rubber Gasket is attached to the hood with Cl2 valve.

• Pollution & process monitoring of sulphur hexafusion
  Ambetronics Engineers Pvt. Ltd manufacturing of pollution & process monitoring for Sulphur Hexafluoride gas, either in process stream or ambient air to detect PPM level for human safety / environments safety. The gas detection instruments are available in Wall mounting, Panel mounting version with latest user friendly micro-controller technology with long life sensors.

• Portable multiangle glossmeter  (20/60/85 Deg)
  Reading Range GU 0 -199.9 - 2000
  Deviation GU ±1.5;   ±1.5%
  Incidence Angle Deg. 20 / 60 / 85

• Ultrasonic thickness gauge for concrete
  The apparatus is mainly used for the test of concrete structure’s quality, confirming the position of the steel bar, protecting the thickness of floor and the diameter of the steel bar. It also can test the position of the metal involved in the nonmetal, such as the cable in the wall and the metal involved in pipelines and woodiness

• Commercial opportunities within the Indian Homeland Security at INDESEC
  Companies providing solutions within the homeland security and defence sector across the globe will now have an integrated platform to showcase and pitch their latest technologies to the Indian government.

• Fire detectors : Playing the vital role
  Detectors have one goal to detect a fire. “They are not very different from one another. The main criteria is determined by the area it is meant to protect, which is the width and the length of the room.

• Designing the fire alarm systems & signaling systems for better performance
  Like sprinklers, today’s fire alarm and signaling systems are often designed for a specific mission. Building codes, fire codes and life safety codes have requirements for the use of fire detection, alarm and signaling systems in certain occupancy or use groups.

• Fire alarm systems in existing buildings
  In general, notification appliances do not require any compatibility listing. They must simply be matched for the proper voltage. There are two types of notification appliance that would require compatibility listing to the control unit. The first is addressable notification appliances. They must be compatible to ensure proper communication with the control unit.

• Using a systems approach for reducing response time
  The basic system and its interface module monitor the pressure gauge signals and contain the obstruction detection technology. The interface module with the specially enabled extinguisher allows a portable fire extinguisher to become a fully supervised component of a monitored fire alarm system.

• Construction fire safety: Knowing the facts
  A wide variety of ignition sources increase the likelihood of fires starting. Concentrations of combustible materials, incomplete compartmentation and other passive systems, and unfinished fire protection systems allow fire to spread unimpeded. Wind conditions can increase the rapidity of fire spread..

• Vital factors in performance based design of facility fire protection
  The sidebar on the right describes three possible examples of such designs. These three examples of performance- based design are hypothetical and simplified. Performance-based designs would normally use a bounding scenario (worst case) to the building.

• Making the use of fire models in the design of fire alarm systems
  Fire models can be used to perform several types of predictions. Models can be used to predict temperatures and velocities of fire plumes and ceiling jets, temperatures and thicknesses of hot smoke layers, and a variety of other fire-related phenomena.

• Reliability of fire alarm systems
  Every engineer responsible for the design of fire alarm systems should become familiar with the standards and processes of Underwriters Laboratories (UL) listing. The process provides a structure and oversight to the manufacturing process that greatly improves component reliability.

• Making the right response to fire alarms
  The number of nuisance alarms and their deterring effects have to be studied over a period of time. In a given building, three nuisance alarms in one week will have a greater deterring effect than three nuisance alarms over the course of a year.

• The efficacy of duct smoke detection
  The goals were to either support, change, or eliminate duct smoke detection requirements from the codes and standards, and to study the many myths about duct smoke detection. That research program has been completed, and reports have been issued. This article is a short summary of that work.

• Physical security : Gaining importance
  Maintaining safe buildings and grounds while securing the network is critical for businesses. This is why safety and security solutions are gaining importance they give businesses access to the necessary tools and resources that enhance physical campus security, track assets, protect the network, and prevent unauthorized network access

• Video encoders : The new wave
  A video encoder is a device that is installed between an analog camera and an IP network. Its main function is to translate the analog video signal that comes into the encoder to a digital video signal (in MPEG-4, MJPEG or H.264) that then can be transmitted across the IP network and used with networked systems, servers and software.

• Access control for mission critical spaces
  Due to the recent demand by users for increased security measures, access control manufacturers have been integrating the characteristics of the standalone security systems into their access control systems.

• Intelligent video solution: Making the right definition
  An “Intelligent Video Solution” could easily be defined as “any video surveillance solution that utilizes technology too automatically, without human intervention, process, manipulate and/or perform actions to or because of either the live or stored video images

• Security cameras: Evaluating the technology trends
  Cameras using digital technology have much greater light sensitivity. Digital technology allows for extended shutter times for more light to be captured by the charge coupled device (CCD), producing pictures of scenes that are too dark for the human eye to see.

• Access control systems : The best choice
  In addition to managing entry and exit activity, today’s access control solutions add value by enhancing the security of a facility. For example, some access control solutions feature options to prevent the reuse of a card to access the same area within a specified period of time, or until the card is used to exit the area.

• Integrating physical security
  Before delving into the wide range of options for access control integration, it’s important to understand how our industry’s products have evolved to fully exploit network devices and connectivity.Second-generation access systems utilize intelligent remote panels that make local decisions when an access card is read.

• Analaysing the security needs
  Starting with a macro understanding of an organization and progressing to micro security tasks, it takes structure to compile and analyze a security plan. The resulting series of recommendations are orchestrated to complement and support each other

• Understanding the converged access control solutions
  Convergence uses data generated by both physical security and IT systems to drive both business process efficiency and security, and its framework defines a migration path for organisational growth. Here are some basic elements required to ensure a solution is truly converged.

• The benefits of biometric access control
  The benefit of a biometric access control system is that only authorised people not merely their credentials are granted access to specific places. A card-based system will only control the access of authorised pieces of plastic, but not who is in possession of the card, which can be shared or stolen.